|
|
|
|
|
| | One component acrylic coat | | |
| | A one-component acrylic coat is a versatile, fast-drying protective and decorative finish used in industrial, wood, and automotive applications. It provides a durable, glossy layer that resists UV damage, corrosion, and chemicals, making it suitable for touch-ups, machinery protection, and wood finishing. It ensures a clear, protective coating across various surfaces. | | |
| • Excellent UV and weather resistance.
• Good abrasion resistance.
• High durability.
• Good color and gloss retention.
• Excellent heat resistance for temperatures up to 90°C.
• Good hiding power.
• Short drying time.
• Available in a wide range of colors.
| | |
| | • Method of Application : | Conventional spray. | | • Mixing Ratio : | (by volume)
Acrycoat Thinner (S506 “known as Sulphacryl”)
1 Litre 0.20 Litre
Stir well before mixing | | • Cleaner : | Clean applying tools by S501 or S502 thinner. |
| | |
| | • Color : | Color Card | | • Flexibility : | Good | | • Abrasian Resistance : | Good | | • Chemical Resistance : | Good | | • Solvent Resistance : | Good | | • Number of Coats : | 1-2. Allow each coat 5-10 minutes to flash until hand slick. | | • Packaging : | 0.9 L in US Quart |
| | |
| Coating performance is, in general, proportional to the degree of surface preparation. Surface must be clean, dry, undamaged and free of oil, grease, and other contaminants prior to coating.
It is recommended to apply Acrycoat on substrates coated by a suitable primer or undercoat. Acrycoat may directly be applied on metal surfaces (advertising pannels) .
| | |
| | • Dry to Touch : | 10 minutes (ASTM-D1640). | | • Dry to Handle : | 1 hour (ASTM-D1640). | | • Note : | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times. |
| | |
| • Acrycoat is classified under high flammable materials. Containers must be kept tightly closed in a cool and well-ventilated place, protected from heat and direct sunlight.
• Shelf life is two years from packing date in unopened original containers at 10 to 40°C.
Safety:
• Well-ventilated conditions should be provided during application.
• Do not breathe or inhale mist.
• Wear air-mask and avoid skin or eye contact.
| |
|
|
|
|
information in this data sheet and in all our data sheets are given to the best
of our knowledge based on laboratory testing and practical experience. Final results
depend on following instructions and on consumer skill. Our responsibility is limited
to providing products that Conform to samples and specimens provided by us. Due
to technical needs, we reserve the right to change any given specification without
notice.
|
|
|
